+ Conductivity
POLYMETRON 9125 Conductivity
  
Details

Conductivity of water
POLYMETRON 9125 Conductivity Transmitter


Product #: 
09125=A=0011

Conductivity / pH / ORP
Conductivity and concentration measurement
Universal transmitter: accepts two electrodes or inductive Polymetron sensors.

Wide choice of display units:
conductivity (S, μS, mS, per m or cm)
resistivity (Ω, kΩ, mΩ, Wper m or cm)
concentration (% or g/l).

Two calibration methods to optimize the sensor response:
- 1 or 2-point, electrical or process
- fully programmable cell constant

Complete set of temperature compensation functions to optimize the measurement:
- fixed programmable coefficient in %/°C or in %/°F
- non-linear, for ultrapure water
- non-linear, freely programmable for concentration
- specific software to conform to USP pharmaceutical regulations

Two electrodes sensor autodiagnostic:
continuous autoadaptive sensor frequency for polarization compensation with system alarm
(patented).
Powerful service menu with sensor polarization test and cable capacity measurement
.

9125 conductivity spares

 Factory Code
09125=A=0000
9125 conductivity transmitter
09125=A=0004
9125 conductivity + 4-relay board
09125=A=0011
9125 conductivity + RS485
09125=A=0012
9125 conductivity + Profibus DP
09125=A=0015
9125 conductivity + 4-relay and RS485 boards
09125=A=0016
9125 conductivity + 4-relay and Profibus DP
09125=A=0020
9125 conductivity (24 V)
09125=A=0024
9125 conductivity + 4-relay board (24V)
09125=A=0031
9125 conductivity + RS485 board (24 V)
09125=A=0032
9125 conductivity + Profibus DP (24 V)
09125=A=0035
9125 conductivity + 4-relay + RS485 (24 V)
09125=A=0036
9125 conductivity + 4-relay board and Profibus DP (24 V)
09125=A=0100
9125 concentration transmitter
09125=A=0104
9125 concentration + 4-relay board
09125=A=0115
9125 concentration + 4-relay and RS485 boards
09125=A=0120
9125 concentration (24 V)
09125=A=0124
9125 concentration + 4-relay (24 V)
09125=A=0131
9125 concentration + RS485 (24 V)
09125=A=0135
9125 concentration + 4-relay + RS485 (24 V)
09125=A=0485
Optional RS485 JBUS/MODBUS for transmitters model 91XX (before 2004; CPU-ph1) or 92XX (before June 2006; CPU-ph1): board + manual (5 languages)
09125=A=0501
Equipped shield plate with earth terminal and fixing system for conductivity / concentration transmitters (9125, 9125 Conc and 9126)
09125=A=0521
Equipped shield plate with earth terminal and fixing system for conductivity / concentration low voltage transmitters (9125, 9125 Conc and 9126)
09125=A=1000
9102 CPU board complete with display (CPU-ph1)
For other transmitters model 91XX, see 9125=A=1001
09125=A=1001
91XX CPU board complete with backlight display, micro-ship (un-programmed), connector for optional profibus DP board. For programming firmware, see 09210=A=8500
09125=A=1003
9102 CPU tropicalised board complete with display (CPU-ph1, for TxPro2 only)
09125=A=1004
91XX CPU tropicalised board complete with backlight display, micro-ship (un-programmed), connector for optional profibus DP board. For programming firmware, see 09210=A=8500
09125=A=1030
CPU upgrade kit with backlight complete (CPU board+display, ...)
09125=A=1103
Optional tropicalised RS485 for Model 9100 after Feb2004 (CPU-ph2): board + instruction manual (5 languages)
09125=A=1200
Profibus DP board for 91XX series
09125=A=1485
Kit for Profibus DP with board for 91xx / 92xx and Operator Manual
09125=A=1500
Conductivity/Concentration measuring board
09125=A=2000
9125/9135/9102 Power supply board
09125=A=2020
9125/9135/9102 low voltage power supply board
09125=A=2485
Optional RS485 JBUS/MODBUS for transmitters model 91XX after February 2004 (CPU-ph2) or 92XX after June 2006 (CPU-ph2): board + instruction manual (5 languages)
09125=A=3000
9125 conductivity transmitter tropicalised
09125=A=3004
9125 conductivity + 4-relay board tropicalised
09125=A=3124
9125 Conductivity + 4-relay board, 24V tropicalised
09125=A=4000
4 relays board option for 9135/9125
09125=A=6200
9125 Conductivity software, specific for CPU-ph1(09125=A=1000), transmitter bought before Feb04
09125=A=6210
Replacement kit with a 91XX CPU board programmed with standard Conductivity firmware, shieldplate and mounting instructions.
09125=A=6400
9125 Concentration software, specific for CPU-ph1(09125=A=1000), transmitter bought before Feb04
09125=A=6410
Replacement kit with a 91XX CPU board programmed with Concentration by Conductivity firmware, shieldplate and mounting instructions.
09125=A=8020
cable for connecting Pt100 resistance simulator
09125=C=0501
Shield plate
09125=C=3000
Transmitter enclosure (without electronic boards) for Monec D 9100, in compliance with NEMA4X
09125=T=0000
9125 transmitter test certificate