+ Conductivity
POLYMETRON 9120 Dual Channel Transmitter
  
Details
Product #: 09120=A=0011

Self monitoring functions Bad sensor connection Defective temperature
  • Calibration conditions
  • Conductivity to validity concentration calculation; value too
  • low or too high (only relevant for the POLYMETRON 9125)

POLYMETRON 9120 dual channel transmitter

The POLYMETRON 9120 dual channel transmitter reduces
acquisition and installation costs by the drastic reduction
of panel space required. Additional calculations are offered
between both conductivity channels (C1 and C2) allowing
better process understanding and control operations:
difference (C1-C2), ratio (C1/C2), percentage accepted
(C2/C1)*100 and percentage rejected
(1-C2/C1)*100.


Dual  conductivity transmitter
Service spare NO

09120=A=0000
9120 dual conductivity transmitter
09120=A=0004
9120 dual conductivity + 4-relay board
09120=A=0011
9120 dual conductivity + RS485
09120=A=0012
9120 dual conductivity + Profibus DP
09120=A=0015
9120 dual conductivity + 4-relay and RS485 boards
09120=A=0016
9120 dual conductivity + 4-relay and Profibus DP
09120=A=0020
9120 dual conductivity (24 V)
09120=A=0024
9120 dual conductivity + 4-relay board (24V)
09120=A=0031
9120 dual conductivity + RS485 board (24 V)
09120=A=0032
9120 dual conductivity + Profibus DP (24 V)
09120=A=0035
9120 dual conductivity + 4-relay + RS485 (24 V)
09120=A=0036
9120 dual conductivity + 4-relay board and Profibus DP (24 V)
09120=A=0500
Equipped shield plate with earth terminal and fixing system for conductivity low voltage transmitters 9120
09120=A=0520
Equipped shield plate with earth terminal and fixing system for conductivity transmitters 9120
09120=A=1500
Dual conductivity measuring board
09120=A=3000
9120 dual conductivity transmitter tropicalised
09120=A=6200
Replacement kit with a 91XX CPU board programmed with dual conductivity firmware and mounting instructions.
09120=A=8005
5m cable and IP65 connector for cond probe and 9120/23
09120=A=8010
10m cable and IP65 connector for cond probe and 9120/23
09120=A=8020
20m cable and IP65 connector for cond probe and 9120/23
09120=T=0000
9120 transmitter test certificate