Hach Polymetron 9610sc Silica Analyzer NEW -- polymetron-hach china｜china he35 Manufactures Water Quality Testing and Analytical

Predictive diagnostic tools, including Hach's proprietary Prognosys technology, warning LEDs, and high-visibility notification screens let you avoid unplanned downtime.

Clean, Fast and Easy Reagent Change

No more dripping reagents on the instrument, the floor, or your clothing while fumbling with tubes and straws. Simply match the color-coded cap to the sealed reagent bottle and twist gently.

Verify Easily with Hach Lab Products So You Don't Waste Time Second-guessing

Grab Sample In and Out features allow quick analysis of a grab sample poured into the analyzer, and facilitate taking a sample out of the analyzer to verify in a lab test.

Accuracy:0–500 µg/L: ±1% or ±1 µg/L of reading, whichever is greater; 500–5000 µg/L: ±5%
(Tested with Hach reagents)

Alarm:Four relays output; type: not powered SPDT relays, each rated at
5 A resistive, 240 VAC maximum
Connection: 18 to 14 AWG wire, 18 AWG stranded recommended

Certifications:CE (EN 61326-1: 2006; EN 61010-1: 2010; EN 60529: 1991, +A1:2000 )
KC (EN 61326-1: 2006)
C-tick (EN 61326-1: 2006)
cETLus (UL 61010-1: 2012; NEMA 250: 2003; CSA C22.2 No 61010-1: 2012)

Controller Compatibility:sc200, sc1000

Dimensions (H x W X D):804 mm x 452 mm x 360 mm

Enclosure Rating:NEMA 4X/IP66

Fitting type:Sample line and sample bypass drain: 6 mm (¼-in.)
Air purge inlet: 6 mm (¼-in.) Chemical and case drains: 9.5 mm (3/8-in.)

Grab Sample:Grab Sample In and Grab Sample Out capability

Light Source:Class 1M LED (light emitting diode) with a peak
wavelength of 810 nm

Lower Limit of Detection (LOD):0.5 µg/L

Measuring Principle:Colorimetric

Mounting:Wall, panel or table

Number of Channels:1, 2, 4, 6; 1

Operating Humidity:5 to 95 % non-condensing (indoor use only)

Operating Temperature Range:5 to 45 °C (41 - 113 °F)

Output:4 to 20 mA

Parameter:Silica

Pollution Degree:2/II

Power Requirements (Voltage):100 - 240 VAC

Protection Class:I

Range:0 to 5000 µg/L as SiO2

Reagent Consumption:2 L of each reagent every 90 days with 15 minute cycle time

Relays:Four; type: not powered SPDT relays, each rated at 5 A resistive, 240 VAC maximum

Repeatability:± 0.5 µg/L or ± 1 % of reading, whichever is greater

Response Time:Typically, 9.5 minutes at 25 °C (77 °F); changes with temperature

Sample Flow Rate:55 to 300 mL/min

Sample Pressure:2 to 87 psi (to Preset Pressure Regulator)

Sample Temperature:5 to 50 °C (41 - 122 °F)

Storage Conditions:-20 to 60 °C (-4 - 140 °F)

Weight:44.09 lbs. (20 kg) (45 lb) without reagents and standards, 36.3 kg (80 lb) with reagents

Parameter/Range/Reagent Information

Silica	Method	Range	Reagent Set(s)	USEPA Compliant?
	Silicomolybdate/Heteropoly Blue	0.00 - 5,000 µg/L	View

90 Days of Continuous Run Time

Save Time on Maintenance

Avoid Downtime

Clean, Fast and Easy Reagent Change

Verify Easily with Hach Lab Products So You Don't Waste Time Second-guessing

Specifications

Parameter/Range/Reagent Information